七龙珠激斗2.1:風力發電箱式變電站 YB-ZF系列

4-.jpg

龙珠激斗2.3无敌版 www.fvmfo.icu 型號及含義
Brief introduction to the products

0.jpg

產品簡介
Brief introduction to the products

FCZW口-38.5風(光伏)電特種箱式變電站是將風(光伏)電機組出口的0.69kV電壓升壓到38.5kV,并網輸出的專用設備,是我公司吸取歐美風(光伏)力發電的經驗,結合國內風(光伏)力發電的實情和現狀量身定做的專供風(光伏)力發電的新產品。該箱式變采用風(光伏)電“一進一出”的特殊結構形式,根據高壓出線方式的不同,分為美式、歐式和組合式三種結構形式。
該產品具有成套性強、占地面積小、投資小、安裝維護方便、造型美觀、耐侯性強等特點。產品具有多種結構,滿足多種特殊使用條件下使用場合,變壓器容量規格全,能滿足5MVA及以下的風(光伏)力發電機組的配套。它的出現適應了全國大范圍建立風(光伏)力發電場的趨勢,是風(光伏)力發電系統的最佳配套產品。

FCZW-38.5 Wind (PV) The special type box-type substation is a special equipment for boosting 0.69kV voltage to 38.5kV at the exit of the wind (photovoltaic) power unit, which is a special equipment for our company to absorb wind power from Europe and America Of the experience, combined with the domestic wind (PV) power of the situation and the status quo tailor-made specifically for the wind (PV) power generation of new products. The box-type variable using wind (photovoltaic), "one into a" special structure, according to the different ways of high-voltage outlet, divided into American, European and combined three structural forms.
The product has a set of strong, small footprint, small investment, easy installation and maintenance, handsome in appearance, strong weather and so on. Products with a variety of structures to meet a variety of special use conditions, the use of the transformer capacity specifications, to meet the 5MVA and below the wind (photovoltaic) power generating units supporting. It appears to adapt to the establishment of a wide range of wind (photovoltaic) power plant in the trend, wind (PV) power generation system, the best matching products.

結構特點
Structural Features

● 按照風(光伏)電技術進行特殊設計,具有滿足風(光伏)電場“一進一出”特殊要求的特點。

● 分箱式結構,高壓室、低壓室和變壓器構成單獨單元。高壓出線單元和低壓進線單元與變壓器分開,安全可靠。

● 變壓器散熱片直接暴露在空氣中,散熱能力強,可防止因箱內溫度過熱而使電氣元件發生故障。

● 過載能力強、損耗小、抗短路能力強、防雷能力強。

● 箱體采用新型材料制成,并經過防腐表涂處理,能耐海水、鹽霧的腐蝕,并能防紫外線照射。

● 體積小巧,結構簡單、布置合理,運輸、安裝方便。

● 產品美觀大方,與周圍環境能很好的協調一致。


■ 風(光伏)電特種箱式變電站(美式)結構形式及外形尺寸

1、風(光伏)電特種箱式變電站(美式)由高壓室、變壓器、低壓室三部分組成,采用低壓進高壓出的“一進一出方式”,變壓器的變壓器的高、低壓接線樁頭采用穿墻套管水平引出方式,分別排布在器身的前后兩端。

2、風(光伏)電特種箱式變電站(美式)負荷開關和熔斷器封裝在油箱內,負荷開關操作在低壓室內進行。熔斷器分主熔斷器和后備熔斷器,主熔斷器可以實現帶電檢修,后備熔斷器分斷能力強,可以有效的?;け溲蠱髡T誦?。

3、低壓室配有低壓框架式空氣開關或低壓熔斷器,用于接受風(光伏)電機組輸出的0.69kV電壓,也可根據用戶需要配置小容量變壓器提供箱變和風(光伏)塔照明用電。

4、變壓器是風(光伏)電場專用升壓變壓器,可配備S11、S13或非晶合金等低損耗變壓器。

5、對于3MW、5MW級風(光伏)電機組,可直接輸入低壓側電壓為6.3kV的箱變。


■ 風(光伏)電特種箱式變電站(歐式)結構形式及外形尺寸

1、風(光伏)電特種箱式變電站(歐式)由高壓室、變壓器、低壓室三部分組成,采用低壓進高壓出的“一進一出方式”。

2、風(光伏)電特種箱式變電站(歐式)高壓室選用本公司專為風(光伏)電箱變研制的FZRN-40.5真空負荷開關,該開關置于高壓室內。該開關設有高壓熔斷器,作為該開關的刀熔隔離開關。刀熔隔離開關操作時,具有明顯的斷開點。該開關具有完善的機械防誤閉鎖功能,刀熔隔離開關與真空滅弧室采用機械聯動,當真空斷路器在合閘狀態時,刀熔隔離開關無法進行分合操作,當熔斷器熔斷時,通過聯動裝置使真空斷路器跳閘。

3、風(光伏)電特種箱式變電站(歐式)可根據用戶要求配裝與環境相協調的外殼,變壓器裝于外殼內。


■ 風(光伏)電特種箱式變電站(組合式)結構形式及外形尺寸

1、風(光伏)電特種箱式變電站(組合式)由高壓室、變壓器、低壓室三部分組成,采用低壓進高壓出的“一進一出方式”。

2、風(光伏)電特種箱式變電站(組合式)高壓室選用真空負荷開關熔斷器組合和隔離開關相配合的出線方式。真空負荷開關熔斷器組合用于開斷負荷電流和變壓器?;?,停電檢修時,隔離開關打開,具有明顯的斷開點,確保安全操作。負荷開關熔斷器組合和隔離開關之間設有完善的機械閉鎖,操作安全可靠。

3、風(光伏)電特種箱式變電站(組合式)變壓器采用外置式結構。

4、風(光伏)電特種箱式變電站(組合式)還可以配置本公司專為風(光伏)電箱變研制的FZRN-40.5真空負荷開關,選用該型開關,可縮小高壓室深度,減小箱變體積。


● According to the wind (photovoltaic) electrical technology for special design, with the wind (photovoltaic) electric field "into a" special requirements of the characteristics.

● Split box structure, high pressure chamber, low pressure chamber and transformer constitute a separate unit. The high-voltage outlet unit and the low-voltage incoming line unit are separated from the transformer and are safe and reliable.

● Transformer heat sink directly exposed to the air, heat capacity, to prevent the overheating of the temperature inside the box and make electrical components failure.

● Overload capacity, loss of small, short-circuit ability, strong ability to mine.

● Box made of new materials, and after the anti-corrosion surface treatment, the ability of sea water, salt spray corrosion, and to prevent ultraviolet radiation.

● Small size, simple structure, reasonable layout, transportation, easy installation.

● The product is beautiful and nice, and the surrounding environment can be very good coordination.


■ Wind (PV) electric special box-type substation (US) structure and dimensions

1, the wind (PV) special box-type substation (US) by the high-voltage room, transformer, low-voltage chamber composed of three parts, the use of low-pressure into the high-pressure "one into a way," Transformer high and low voltage wiring pile head Using the level of wall bushing leads way, were arranged in the body of the front and rear ends.

2, the wind (PV) special box-type substation (American) load switch and fuse package in the tank, the load switch operation in the low-pressure room. Fuse main fuse and backup fuses, the main fuse can be charged to repair, backup fuse breaking capacity, can effectively protect the normal operation of the transformer.

3. Low-voltage room with low-voltage frame air switch or low-voltage fuse for receiving wind (PV) motor output 0.69kV voltage, can also be configured according to user needs to provide small capacity transformers box and wind (PV) tower lighting Electricity.

4, the transformer is wind (PV) electric field dedicated step-up transformer, can be equipped with S11, S13 or amorphous alloy and other low-loss transformers.

5, for 3MW, 5MW wind (photovoltaic) motor group, can be directly input voltage of 6.3kV low voltage side of the box changes.


■ wind (PV) special box-type substation (European) structure and dimensions

1, the wind (PV) special box-type substation (European) by the high-pressure room, transformers, low-voltage chamber composed of three parts, using low-pressure into the high-pressure "into a way."

2, the wind (PV) special box-type substation (Continental) high-pressure room selection of the company specifically for the wind (photovoltaic) electric box developed by FZRN-40.5 vacuum load switch, the switch placed in the high-pressure room. The switch is provided with a high-voltage fuse as a knife-fuse isolating switch for the switch. When the knife melt isolating switch is operated, it has obvious breaking point. The switch has a perfect mechanical anti-mis-locking function, the knife melt isolation switch and vacuum interrupter using mechanical linkage, when the vacuum circuit breaker in the closing state, the knife fuse isolation switch can not be divided into operation, when the fuse blown, The vacuum circuit breaker is tripped by the linkage.

3, wind (PV) special box-type substation (European) can be equipped with the requirements of the user and the environment in harmony with the shell, the transformer installed in the shell.


■ wind (PV) electrical special box-type substation (modular) structure and dimensions

1, the wind (PV) special box-type substation (modular) by the high-pressure room, transformer, low-voltage chamber composed of three parts, using low-pressure into the high-pressure "one into a way." 

2, wind (PV) special box-type substation (modular) high-pressure chamber vacuum load switch fuse combination and isolation switch with the outlet. Vacuum load switch fuse combination for breaking load current and transformer protection, power maintenance, isolation switch open, with a clear break point to ensure safe operation. Load switch fuse combination and isolation switch between the perfect mechanical locking, safe and reliable operation.

3, wind (PV) special box-type substation (modular) transformer with external structure.

4, Wind (PV) electric special box-type substation (modular) can also be configured for the wind (photovoltaic) box developed FZRN-40.5 vacuum load switch, use this switch, can reduce the pressure chamber depth, Small box variable volume.

技術參數
Product Structure

4.jpg