龙珠激斗:10kV電力變壓器 SCB11系列

5-.jpg

龙珠激斗2.3无敌版 www.fvmfo.icu 型號及含義
Brief introduction to the products

未標題-7.jpg

產品簡介
Brief introduction to the products

SC(B)11型環氧樹脂澆注干式電力變壓器其高/低壓繞組均采用環氧樹脂絕緣澆注包封,選用環氧樹脂加玻璃纖維等絕緣材料,具有自熄特性,導熱系數和阻燃性能好。低壓繞組為雙層圓筒式或銅箔繞制、高壓繞組采用分段圓筒式結構,較大容量繞組在繞組中部設置冷卻氣道,以降低繞組溫度,擴大散熱面積。繞組經脫氣并在真空狀態下澆注/干燥成型,固化后形成堅固的圓筒形整體,絕緣性能有保證、安匝分布均勻、抗短路能力強、耐雷電沖擊水平高。不會因短路產生電弧,且抗裂、耐高溫,在高溫下樹脂不會產生有毒有害氣體,阻燃、防爆、不污染環境,可增強產品的機械/電氣強度、延長產品的使用壽命。新產品廣泛應用于城鄉電網建設與改造工程、高層建筑、商貿中心、賓館酒店、居民小區、旅游景點、劇院、港口、機場、地鐵、箱式變電站等輸配電系統。特別適合于防火防爆要求高、負荷波動大以及污穢/潮濕等比較惡劣或特殊的環境之中,可在100%濕度情況下或在正常工作電壓下長期安全可靠地運行,從而減少了停電維修帶來的損失和麻煩,新產品彌補了油浸式配電變壓器的缺陷。

SCB11 Epoxy Resin Pouring Dry Power Transformer, its high/low voltage winding both adopt the epoxy resin insulation pouring envelop, it has self-extinguishing feature, thermal conductivity and flame-retardant performance. The low voltage winding is double layers cylinder or copper foil winding, the high voltage winding is subsection cylinder structure. In order to reduce the temperature and enlarge the heat exchanging area, a greater capacity winding sets up the cooling airway in the center of it. Winding is molding by deaeration and pouring/drying under vacuum condition, after this step it became the firm cylinder, so that the insulation performance is guaranteed, ampere turns even distributing, strong anti-short-circuit capacity and high lighting-resistant level. It won’t bring the voltaic arc caused by short-circuit, crack and high temperature resistant. Under the high temperature the resin doesn’t produce the toxic and harmful gas, it’s anti-flaming, anti-explosive and nonpolluting, enhancing the mechanical/ electric strength and extending the using life of the products. The new product is widely used in urban and rural power grid construction and renovation project, high-rise buildings, commercial centers, hotels, residential areas, tourist attractions, theaters, ports, airports, subways, box-type transformer substation and other transmission and distribution system, especially suitable for use in high request of fire and explosion prevention, large load fluctuation, the dirty/ damp and bad or special environment. It can be operating safely and reliably under 100% humidity so that it reduces the losing and trouble of power cut maintenance. The new product also makes up for the defects of oil immersed distribution transformer.

產品結構
Product Structure

SC(B)11型環氧樹脂澆注干式電力變壓器其高/低壓繞組均采用環氧樹脂絕緣澆注包封,選用環氧樹脂加玻璃纖維等絕緣材料,具有自熄特性,導熱系數和阻燃性能好。低壓繞組為雙層圓筒式或銅箔繞制、高壓繞組采用分段圓筒式結構,較大容量繞組在繞組中部設置冷卻氣道,以降低繞組溫度,擴大散熱面積。繞組經脫氣并在真空狀態下澆注/干燥成型,固化后形成堅固的圓筒形整體,絕緣性能有保證、安匝分布均勻、抗短路能力強、耐雷電沖擊水平高。不會因短路產生電弧,且抗裂、耐高溫,在高溫下樹脂不會產生有毒有害氣體,阻燃、防爆、不污染環境,可增強產品的機械/電氣強度、延長產品的使用壽命。新產品廣泛應用于城鄉電網建設與改造工程、高層建筑、商貿中心、賓館酒店、居民小區、旅游景點、劇院、港口、機場、地鐵、箱式變電站等輸配電系統。特別適合于防火防爆要求高、負荷波動大以及污穢/潮濕等比較惡劣或特殊的環境之中,可在100%濕度情況下或在正常工作電壓下長期安全可靠地運行,從而減少了停電維修帶來的損失和麻煩,新產品彌補了油浸式配電變壓器的缺陷。


The new product has advanced performance level, it chooses the type “11” technique data, comparing with GB/T10228-2008 standard, which reduced the no-load loss by 20% on average, the no-load current by 70% on average, the load loss by 10% on average and the noise class determination 10dB on average. It is accord with the national industrial policy and technology policy.

The new product is anti-flaming, anti-explosive and anti-corrosive, nonpolluting, it can be installed in the load center. The good humidity resistance makes it can be operating safely and reliably under 100% humidity. The strong load capacity forces the rated capacity to raise 20~40% when the wind is cooling.

High/low voltage winding epoxy resin vacuum pouring, crack resistant after the gelatin is solidified, high temperature resistance and strong mechanical strength. High/low voltage winding ampere turns even distributing, strong anti-short-circuit capacity and high lighting-resistant level.

The partial discharging capacity of new product≤10pC, good insulation performance and high electric strength extend the using life of the product.

The new product has the functions of automatic temperature monitoring and protection, according to  the requirements we can provide the different classes protective shells (IP20, IP30). It can prevent the happening of man-made accidents and it’s convenient to use inside.

The new product has small size , light weight, easy to install and maintenance free.


技術參數
Product Structure

未標題-8.jpg


訂貨須知
ordering Information

訂貨方在訂貨時應給本公司提供與產品有關的下列數據

1. 型號規格       

2. 額定容量        

3. 相數      

4. 頻率     

5. 電壓組合/分接范圍

6. 聯結組標號     

7. 短路阻抗        

8. 冷卻方式        

9. 外殼防護等級      

10. 其它特殊要求/使用條件


In order to serve you better, please offer the following parameters when you are choosing our products.

1. Type      

2. Rated Capacity      

3. Phase No.     

4. Frequency

5. Voltage combination/ Tapping Range    

6. Union Symbol     

7. Short Circuit Impedance

8. Cooling Model     

9. Protection Class of Shell   

10. Other Special Requests/ Conditions of Use