龙珠激斗2018限时神卡:配電箱 PZ30

19-.jpg

龙珠激斗2.3无敌版 www.fvmfo.icu 產品簡介
Brief introduction to the products

PZ30系列模數化終端照明箱(以下簡稱終端箱)適用于交流50/60Hz,額定電壓230/400V,負載電流不超過100A的單相三線或三相五線的終端電路中,作為對用電設備進行控制、配電同時也對線路的過載、短路、漏電起?;ぷ饔???曬惴河糜詒齬?、民用建筑、工礦企業、商業、高層大廈、車站、醫院、學校、機關住宅等現代建筑場所。

The PZ30 Series Modularization Box Terminal (hereinafter referred to as terminal box) is suitable for the terminal circuit of single phase three lines or three phase fine lines, AC 50/60Hz, rated voltage 230/400V, the load current not more than 100A , for the control of electrical equipment and power distribution and for the protection of the over load, short circuit and electrical leakage of the electric circuits. It can be widely used for hotels, civil construction, industrial and mining enterprisees, commertial, high-rise buildings, realroad stations, hospitals, schools and residential institutions.

結構特點及功能
Structural Characteristics and Functions

主要結構部件有蓋、箱體、透明罩、安裝軌、導電排、進線護罩和母線檔板,并設有中性線和接地端子,箱內電氣元件全部采用模數寬度為9mm的模數化電器元件,可根據需要任意組合成各種不同的電路方案,每個單元為18mm,最多可安裝60個單元。安裝的電器元件手柄外露便于操作,帶電及其它部分遮蓋于上蓋內部,打開透明翻門即可方便地操作,使用安全可靠。

The main structural components has covers, boxes,transparent covers, installation rails, conducting bars, incoming line shields and bus guards as well as neutral lines and ground terminals. All the electrical components inside the box are modularized ones with the width of 9mm. Different circuit programs can be organized according to the requirements. Each unit is 18mm. At most 60 units can be installed. The handles of the electrical components are exposed for convenient operation. The live and other parts are covered in the upper cover. On opening the transparent  doors, the operation shall be facilitated, safe and reliable.


技術參數
Product Structure

未標題-25.jpg


安裝形式
Installation Form

有明裝式(懸掛式)和暗裝式(嵌墻式)兩種。 暗裝式備有預埋箱和裝飾面板。

Exposed form (suspended) and concealed form (wall inbuilt). The concealed form has embedded boxes and decorative panels.


訂貨須知
ordering Information

訂貨方在訂貨時應給本公司提供與產品有關的下列數據

A.產品型號

B.電氣系統圖及各種元件的型號與規格

C.訂貨數量


The customer should provide us with the following data concerning the products:

A. Product Type

B. Electric System Schematics and Types and Specifications of the electrical Components

C. Order Quantity