龙珠激斗怎么开人物:低壓成套開關設備 MNS

12-.jpg

龙珠激斗2.3无敌版 www.fvmfo.icu 產品簡介
Brief introduction to the products

MNS低壓抽出式開關柜適用于交流50~60赫茲,額定工作電壓660V及以下發供電系統,如發電、輸配電、石化部門、廠礦企業、建筑供電等行業,作為電能分配、控制及無功補償等,尤其是對大型電廠、石油化工等自動化程度密集,要求與計算機對話接口、通訊的場所,能充分滿足其需要。

The MNS Low-Voltage Draw Out Switchgear is used for power generation and supply system (AC 50 ~ 60Hz, rated working voltage ≤660V), such as power generation, power distribution, petrochemical, factories and mines, constructions for power distribution, control and reactive power compensation, especially the sites for large-scale power plants, petrochemical industry where automation integrated and computer dialogue interfaces are needed.

產品引用標準
Standards for Product

產品符合IEC-493-1《低壓成套開關設備和控制設備》,

GB7251《低壓成套開關設備》,

ZBK36001《低壓抽出式成套開關設備》等標準。


IEC-493-1 “Low Voltage Switchgear Package and Control Equipment”、

GBT251 “Low Voltage Switchgear Package”

ZBK36001 “Low Voltage Draw Out Switchgear Package”


技術參數
Product Structure

電氣性能

額定工作電壓:380V、660V

主母線最大工作電流:5500A(IP00)、4700A(IP30)

主母線短時(1S)耐受電流:100kA(有效值)

配電母線(垂直母線)最大工作電流: 1000A

配電母線(垂直母線)短時峰值電流:

標準型 90kA(最大值)加強型 130kA(最大值)

防護等級

符合IEC529、DIN40050標準

IP30對大于φ2.5mm固體防護 

IP40對大于φ1.0mm固體防護IP54對塵埃和任意方向噴濺作防護

訂購IP54防護等級時應與制造廠協商


Electrical Performance

Rated Working Voltage: 380V, 660V

Main Bus Maximum Working Current: 5500A (IP00), 4700A (IP30)

Main Bus Short-term (IS) Withstand Current: 100kA (effective value)

Power Distribution Bus (vertical bus) Maximum Working Current: 1000A

Power Distribution Bus (vertical bus) Short-term Peak Current:

Standard 90kA (Max) Enhanced Type 130kA (Max)

Protection Level

In Accordance with IEC529 and DIN40050

Solid Protection IP30 for φ?2.5 mm

Solid Protection IP40 for φ?1.0 mm; Protection for Dust and Splash in Arbitrary Direction IP54

For ordering protection IP54, negotiation ahould be carried out with the manufacturer.


MNS低壓抽出式開關柜特點
Characteristics of the MNS Low Voltage Draw Out Switchgear

★ 設計緊湊:以較小的空間能容納較多的功能單元,節省柜體體積,MCC柜最多可安裝36個8E/4抽屜或9個8E抽屜,抽屜單元具有體積小、功能強、導向準確、互換性極強的特點,適合安裝三極或四極空氣開關,并具有可靠的機械聯鎖 ,功能單元的有效安裝高度為1800mm ,在同一柜體中可自由組合成固定式和抽屜式二種形式 。

★ 結構通用性強,組裝靈活:以25 mm為摸數的C型型材能滿足各種結構形式、 防護等級及使用環境的要求

★ 采用標準??檣杓疲悍直鸝勺槌殺;?、操作、轉換、控制、調節、測定、指示等標準單元,用戶可根據需要任意選用組裝。以200余種組裝件可以組成不同方案的柜架結構和抽屜單元。

★ 安全性:大量采用高強度阻燃型工程塑料組件,有效地加強了防護安全性能。

★ 垂直母線通道采用分斷式功能板,直角L型分支母線嵌裝在其中 

★ MCC柜可背靠背排列

★ 裝配方便:不需要特殊復雜工具。


Compact Design: More functional units could be accommodated in a smaller space, saving the volume of the cabinets. MCC cabinet can accommodate 36 pcs of 8E/4 drawers. The drawer unit is charaterized by its compact volume, strong function, accurate orientation and stong interchangeability, suitable for installation of third or fourth class air switch. It has reliable mechanical interlock. The effective installation height of the functional unit is 1800 mm. The solid type or drawer type could be organized freely in the same switchgear.

Unified structure, flexible assembly: 

The 25mm C-profile sectional materials can meet the requirements of various structural forms, protection levels and operational environment.

The use of standard modular design: It can be organized into the standard units for protection, operation, conversion, control, regulation, measuring and instruction. The user can make option according to the needs of any assembly. With more than 200 assembling parts, different shelves structures and drawer units could be organized.

Safety: A large number of high-strength flame-retardant engineering plastics components are adopted, which effectively enhances the performance of the protective security.

The vertical bus channel adopts breaking functional board in wuich the right angle L type branch bus is inserted.

The MCC cabinets can be arranged back to back.

Easy assemblying: No special complicated tools are needed.


使用條件
Conditions of Use

※ 戶內安裝使用,海拔不超過2000M。

※ 周圍空氣溫度不超過不高于+40℃,不低于-5℃,最高日平均溫度不得高于+35℃。

※ 相對濕度:最高溫度在+40℃時不超過50%,在較低溫度時允許有較大的相對濕度(例如+20℃時為90%)。

※ 抗震烈度:8級。

※ 安裝時柜體垂直面傾斜度不超過5度。

※ 安裝場合應無劇烈震動、沖擊以及不足以使電器元件受到腐蝕。

※ 用戶有特殊要求時可以與制造廠協商解決。


Indoors. Height above Sea Level ≤ 200 M.

Ambient Temperature ≥-5℃ ≤+40℃,Average Maximum Daily Temperature ≤+35℃.

Relative Humidity: ≤ 50% at +40℃ (Max); At a lower temperature to allow a greater relative humidity (for example 90% at +20 ℃).

Seismic Intensity: VIII

For installation, the tilt of the vertical surface does not exceed 5°

The installation site should be free from violent vibration, impact and corrosion of the electrical components.

For special requirements, the user can negotiate with the manufacturer.