龙珠激斗2.3无敌版 www.fvmfo.icu 型號及含義
The KYN28A-24kV Sheathed Move-off Style AC Metal-Enclosed Switchgear (hereinafter referred to as Switchgear) is of an assembly structure and equipped with novel fully insulated vacuum circuit breakers. The appearance quality and the fit precision of the hand cart and the cabinet are greatly improved. The pushing and pulling of the hand cart are rather convenient. The rapid production, assembling and timely delivery are guaranteed. The utilization ratio of the floor space for assembling is increased. All these are suitable for batch production. A closed -door operation can be realized. Its normal operation, including the circuit breaker switch, the positions of the circuit breaker hand cart for working, test and isolation, the switch for grounding, can be carried out under the closed condition of the door for circuit breaker's cabinet. The product is in accordance with the standards of GB3906 “3 ~ 35kV AC closed metal switchgear and control equipment”, GB/T11022 “The technical requirements of the high-voltage switchgear and control equipment standard” and IEC60298: “AC closed metal switchgear and control equipment, rated voltage ≥ 1kV or ≤ 52kV”. The product is used for the power system, 40.5kV three phase AC 50Hz, such as power plants, substations, industrial and mining enterprises for power distribution with control, protection and monitoring functions. In addition to be widely used in general power systems, it may also be used in the places of frequent operations. The use of environmental conditions in line with GB3906 "3-35kV AC metal-enclosed switchgear" required by the environmental conditions of normal use.
The Switchgear KYN61-40.5kV, according to the composition of its structure, can be divided into cabinets and the hand cart of the circuit breakers. Equipped in the cabinets are the novel fully insulated vacuum circuit breakers or imported sulfur hexafluoride circuit breakers. The switchgear is of assembly structure, which improves the apprearance quality and the fit precision of the hand cart and the cabinet. The product is beautiful in appearance and could be organized into rapid production, assembling and timely delivery. The Body of the switchgear adopts the imported aluminium and zinc coated plates manufactured and bended into form with CNC sheet metal equipment and assembled with high strength bolts and nuts (8.8 grade) or rivet nuts.
The typical program, according to functions, can be divided into the cabinets of relays and meters, hand cart, cables and buses. The four parts are separated according to the grounded metal plates so as to prevent the electric arc from extending and limit the possible faults in a small scope. The separated cabinets, except the relay and meter cabinet, are all equipped witn independent voltage relief channels. When some part needs replacement of components or maintenance, it is not necessary to shut down the power of whole cabinet. The only thing to do is to turn off the power at both ends of the component. The maintenance personnel can enter the cabinet safely. The protection level of the shell is IP4X. When the door of the hand cart is open and the hand cart is in the positions of breaking and test, the protection level is IP2X. A closed -door operation can be realized. Its normal operation, including the circuit breaker switch, the positions of the circuit breaker hand cart for working, test and isolation, the switch for grounding, can be carried out under the closed condition of the door for high-voltage circuit breaker's cabinet. The switchgear has cables in and out, overhead lines, buses, insulations and lightning arrests. The composite insulation is adopted. The materials are entirely based on domestic technology.
Conditions of Use
Ambient Temperature: Maximum temperature +40℃, Minimum temperature -10℃, average temperature measured within 24 hours ≤ 35℃
Height above sea level: ≤ 1000m
Relative Humidity: Average daily relative humidity ≤ 95%, average monthly relative humidity ≤ 90%,
Seismic Intensity: ≤ VIII
Water Vapor Pressure: Average daily water vapor pressure ≤ 2.2kPa, average monthly water vapor pressure ≤ 1.8kPa,
The site without fire hazard, explosion, severe contamination, chemical corrosion and violent vibration.
The customer should provide us with the following data concerning the products:
A.The complete primary wiring diagram of the engineering system.
B.The secondary wiring diagrams of the high-voltage cabinets.
C.The layout of the cabinets (If there is bus bridge, the installation sizes and layout should be provided).
D.The layout of the small bus at the top of the cabinet.
E.Thequantity and specifications of the spare parts of the switchgears
F.While ordering the switchgears, the special operating conditions should be provided in written forms.
G.The paint color of the switchgear shell and panel.
H.Date of Delivery of the Switchgear